Sun Audio SV-300BE chassis with cover and additional attached parts

Spare vacuum tubes and silver-plated Teflon wiring (Photo 13) have been added.

This is a chassis with a cover for the SUN AUDIO kit SV-300BE.
It is a shared chassis for SV-2A3 and SV-KT88, and after modifying it for each, it was disassembled and stored.
It was used for several tens of hours (3-4 months).
Large mounting holes for the two output transformers are pre-drilled.
The volume control has been moved to the top of the chassis, so there is also a hole on the top surface.
The power switch has been moved to the rear of the chassis.
Some areas have had the paint removed for chassis grounding.
Neon PL and nameplates are not included.
Please check the attached parts in the photos. Many of the parts included with the kit have been replaced with my own.
The two extra 8-pin vacuum tube sockets are for KT88 (the 5U4G socket has solder marks).

The attached vacuum tubes, capacitors, resistors, diodes, and silver-plated Teflon wiring are listed below.

・Vacuum Tubes (Photo 7)
2 x 6SN7 and 1 x 5U4G included with the kit.
2 x 6SN7 and 1 x 5U4G purchased separately as spare tubes (unused).
・Diodes
2 x S5VB60 (Shindengen 6A 600V)
・Resistors (with solder marks)
2 x 1kΩ (enamel-coated resistors included with the kit, 20W)
4 x 1.5kΩ (DALE, 10W, for 2A3)
・Capacitors (including those with solder marks)
Block Capacitors
1 x (nichicon Audio Senka Hanbai, 47μF×2, 500V)
2 x 100μF, 350V (SPRAGUE ATOM)
2 x 100μF, 150V (SPRAGUE)
2 x 100μF, 160V (nichicon Audio Senka Hanbai)
2 x 100μF, 35V (Rubycon)
2 x 80μF, 150V (SPRAGUE ATOM)
2 x 3000μF, 15V (MALLORY)
2 x 0.22μF, 300V (SPRAGUE VITAMIN)
2 x 0.22μF, 400V (ASC)
2 x 0.22μF, 1000V (TOICHI)
・Wiring Material (Photo 13)
Silver-plated Teflon wire, 2 colors.
Thickness: AWG18

Thank you for looking.